Influence of temperature on acoustic emission source location accuracy in underground structure

An acoustic emission (AE) experiment was carried out to explore the AE location accuracy influenced by temperature. A hollow hemispherical specimen was used to simulate common underground structures. In the process of heating with the flame, the pulse signal of constant frequency was stimulated as an AE source. Then AE signals received by each sensor were collected and used for comparing localization accuracy at different temperatures. Results show that location errors of AE keep the same phenomenon in the early and middle heating stages. In the later stage of heating, location errors of AE increase sharply due to the appearance of cracks. This provides some beneficial suggestions on decreasing location errors of structural cracks caused by temperature and improves the ability of underground structure disaster prevention and control.     

爆破位置对深凹露天矿山炮烟扩散的影响研究

深凹露天矿山由于其特殊的结构,爆破产生的炮烟扩散稀释较为困难,严重危害生产作业人员的生命安全与健康。基于实际矿山构建了深凹露天矿山的二维物理及数学模型,采用非稳态数值分析方法研究了不同爆破位置下,深凹露天矿山采坑内爆破炮烟的扩散规律。研究结果表明：不同爆破位置下,露天采坑内均出现复环流,爆破点位置是影响露天采坑内风流结构特征的重要因素；露天采坑内的炮烟最高浓度均随着时间变化而逐渐下降,但下降的速率逐步减小,呈现三个阶段的下降趋势；爆破位置位于背风侧时露天采坑内的炮烟最高浓度和降至安全浓度所需时间远高于迎风侧三个爆破位置；随着背风侧爆破点距采坑底部距离的减小,炮烟最高浓度及降至安全浓度所需时间先降低后增加,炮烟最高浓度及降至安全浓度所需时间随着迎风侧爆破位置距采坑底部距离的减小而增加。研究结果对于指导深凹露天矿山企业合理组织爆破后的生产作业和保障作业人员安全具有重要意义。     

The effect of biomass feeding location on rice husk gasification for hydrogen production

The objective of this study is to investigate the impact of biomass feeding location on rice husk gasification for hydrogen production. By comparing the results between top-feed and bottom-feed of the feedstock of the fluidized bed biomass gasification at the reaction temperature between 600～1000 °C and ER = 0.2, 0.27, and 0.33 without steam, the optimum low heating value was increase by 2.35 kJ/g-rice husk by the top-feed to gasifier. Although the yield of hydrogen was decreased by 42% for the rice husk gasification by the top-feed operation, the yield of CO, CO2, and CH4 were highly increased, which enhancing the heating value of the effluent gas. The study results suggested the potential route of the biomass gasification at the different feeding location.     

YOLSO: You Only Look Small Object

Small object detection is challenging and far from satisfactory. Most general object detectors suffer from two critical issues with small objects: (1) Feature extractor based on classification network cannot express the characteristics of small objects reasonably due to insufficient appearance information of targets and a large amount of background interference around them. (2) The detector requires a much higher location accuracy for small objects than for general objects. This paper proposes an effective and efficient small object detector YOLSO to address the above problems. For feature representation, we analyze the drawbacks in previous backbones and present a Half-Space Shortcut(HSSC) module to build a background-aware backbone. Furthermore, a coarse-to-fine Feature Pyramid Enhancement(FPE) module is introduced for layer-wise aggregation at a granular level to enhance the semantic discriminability. For loss function, we propose an exponential L1 loss to promote the convergence of regression, and a focal IOU loss to focus on prime samples with high classification confidence and high IOU. Both of them significantly improves the location accuracy of small objects. The proposed YOLSO sets state-of-the-art results on two typical small object datasets, MOCOD and VeDAI, at a speed of over 200 FPS. In the meantime, it also outperforms the baseline YOLOv3 by a wide margin on the common COCO dataset.     

基于拼接缝自适应消除和全景图矫直的快速图像拼接算法

针对图像拼接存在色差过渡不均匀、图像倾斜扭曲及拼接效率低的现象，提出一种基于拼接缝自适应消除和全景图矫直的快速图像拼接算法。首先，用尺度不变特征变换（SIFT）提取图像指定区域特征点并用双向K近邻（KNN）算法进行图像配准，有效提高算法效率；其次，利用动态规划思想提出自适应公式找到最优拼接缝并用图像融合算法对其自适应消除，解决拼接缝色差过渡不均匀问题；最后，针对累积拼接误差形成全景图倾斜的现象，利用边缘检测算法提出自适应拟合四边形矫直模型，把原始全景图矫直为一个全新的全景图。所提算法与分块图像拼接和二叉树图像拼接算法相比，图像质量提升了5.84%~7.83%，拼接时间仅为原来的50%~70%。实验结果表明，该算法不仅通过自适应更新机制减少不同图像背景下拼接缝色差过渡不均匀的现象，从而提高了图像质量；而且提高了拼接效率，降低了全景图倾斜扭曲程度。     

Location Privacy in Device-Dependent Location-Based Services: Challenges and Solution

With the evolution of location-based services (LBS), a new type of LBS has already gain a lot of attention and implementation, we name this kind of LBS as the Device-Dependent LBS (DLBS). In DLBS, the service provider (SP) will not only send the information according to the user’s location, more significant, he also provides a service device which will be carried by the user. DLBS has been successfully practised in some of the large cities around the world, for example, the shared bicycle in Beijing and London. In this paper, we, for the first time, blow the whistle of the new location privacy challenges caused by DLBS, since the service device is enabled to perform the localization without the permission of the user. To conquer these threats, we design a service architecture along with a credit system between DLBS provider and the user. The credit system tie together the DLBS device usability with the curious behaviour upon user’s location privacy, DLBS provider has to sacrifice their revenue in order to gain extra location information of their device. We make the simulation of our proposed scheme and the result convince its effectiveness.     

A hybrid multiple feature construction approach for classification using Genetic Programming

The purpose of feature construction is to create new higher-level features from original ones. Genetic Programming (GP) was usually employed to perform feature construction tasks due to its flexible representation. Filter-based approach and wrapper-based approach are two commonly used feature construction approaches according to their different evaluation functions. In this paper, we propose a hybrid feature construction approach using genetic programming (Hybrid-GPFC) that combines filter’s fitness function and wrapper’s fitness function, and propose a multiple feature construction method that stores top excellent individuals during a single GP run. Experiments on ten datasets show that our proposed multiple feature construction method (Fcm) can achieve better (or equivalent) classification performance than the single feature construction method (Fcs), and our Hybrid-GPFC can obtain better classification performance than filter-based feature construction approaches (Filter-GPFC) and wrapper-based feature construction approaches (Wrapper-GPFC) in most cases. Further investigations on combinations of constructed features and original features show that constructed features augmented with original features do not improve the classification performance comparing with constructed features only. The comparisons with three state-of-art methods show that in majority of cases, our proposed hybrid multiple feature construction approach can achieve better classification performance.     

Facial expression recognition of intercepted video sequences based on feature point movement trend and feature block texture variation

Facial Expression Recognition (FER) is an important subject of human–computer interaction and has long been a research area of great interest. Accurate Facial Expression Sequence Interception (FESI) and discriminative expression feature extraction are two enormous challenges for the video-based FER. This paper proposes a framework of FER for the intercepted video sequences by using feature point movement trend and feature block texture variation. Firstly, the feature points are marked by Active Appearance Model (AAM) and the most representative 24 of them are selected. Secondly, facial expression sequence is intercepted from the face video by determining two key frames whose emotional intensities are minimum and maximum, respectively. Thirdly, the trend curve which represents the Euclidean distance variations between any two selected feature points is fitted, and the slopes of specific points on the trend curve are calculated. Finally, combining Slope Set which is composed by the calculated slopes with the proposed Feature Block Texture Difference (FBTD) which refers to the texture variation of facial patch, the final expressional feature are formed and inputted to One-dimensional Convolution Neural Network (1DCNN) for FER. Five experiments are conducted in this research, and three average FER rates 95.2%, 96.5%, and 97% for Beihang University (BHU) facial expression database, MMI facial expression database, and the combination of two databases, respectively, have shown the significant advantages of the proposed method over the existing ones.